There are many modern variations of incense powder available today. If this is not the kind that you prefer you can also get sticks, cones, or even resins that look like colorful little crystals. No matter the kind you obtain there are some safety measures that are required as with anything else that will involve heat and fire.
Many people have been using the sticks in America for a long time. Here in the United States people will sometimes steer away from a cultural tradition if only to appear more assimilated. Not that there is anything wrong with following tradition or doing things the way our ancestors did them. In many ways it can be more fulfilling.
Once you have those items secured and ready you will need a set of charcoal disks. The powdered type will need something to both ignite the substance as well as to keep a continuous heat applied to it. The charcoal disks are perfect for the task and are used for other variations of incense so it is easy to find. Usually it can be purchased in the same place you purchased the incense.
The purpose of the disk is to burn and keep burning, thus keeping the powders lit. However there is an alternative to needing the disks. Modern technology has made it so certain ingredients can be used in the powder to make it self-igniting. So once it is lit it will keep itself burning because of the additives and there is then no need at all for the charcoal.
The people who practice these various religious ceremonies like to use resins and powders instead of the more modernized sticks because they believe them to be more pure and have a stronger connection to the spirit world. The type of connection they need to produce the desired results of whatever it is they are doing at the time.
Burning this type is pretty similar to the use of the resins that come in crystal form. The loose powders come in many colors and flavors or scents and they are proclaimed to all have different properties and do different things. However the ignition of these is rather simple and you only need a few tools to get started.
When the disk is lit and burning with a red glow you can place it back into the bowls. At this point you can grab a pinch of the powders and press it into a ball or cone shape. Anything to keep the grains together. Carefully place it on top of the burning disk and wait. When the heat gets to the powder it will start to burn.
The incense powder can be placed in the bowl either on top of the charcoal disk of not depending on the type you have. Once prepared you can use your fingers to pres it together into a cone or mountain shape and then light with a match. Once it is lit it will burn for a few moments until it goes out all by itself. No need to blow out the flame. Once it goes out it will begin producing the wonderful scents that you are looking for.
Many people have been using the sticks in America for a long time. Here in the United States people will sometimes steer away from a cultural tradition if only to appear more assimilated. Not that there is anything wrong with following tradition or doing things the way our ancestors did them. In many ways it can be more fulfilling.
Once you have those items secured and ready you will need a set of charcoal disks. The powdered type will need something to both ignite the substance as well as to keep a continuous heat applied to it. The charcoal disks are perfect for the task and are used for other variations of incense so it is easy to find. Usually it can be purchased in the same place you purchased the incense.
The purpose of the disk is to burn and keep burning, thus keeping the powders lit. However there is an alternative to needing the disks. Modern technology has made it so certain ingredients can be used in the powder to make it self-igniting. So once it is lit it will keep itself burning because of the additives and there is then no need at all for the charcoal.
The people who practice these various religious ceremonies like to use resins and powders instead of the more modernized sticks because they believe them to be more pure and have a stronger connection to the spirit world. The type of connection they need to produce the desired results of whatever it is they are doing at the time.
Burning this type is pretty similar to the use of the resins that come in crystal form. The loose powders come in many colors and flavors or scents and they are proclaimed to all have different properties and do different things. However the ignition of these is rather simple and you only need a few tools to get started.
When the disk is lit and burning with a red glow you can place it back into the bowls. At this point you can grab a pinch of the powders and press it into a ball or cone shape. Anything to keep the grains together. Carefully place it on top of the burning disk and wait. When the heat gets to the powder it will start to burn.
The incense powder can be placed in the bowl either on top of the charcoal disk of not depending on the type you have. Once prepared you can use your fingers to pres it together into a cone or mountain shape and then light with a match. Once it is lit it will burn for a few moments until it goes out all by itself. No need to blow out the flame. Once it goes out it will begin producing the wonderful scents that you are looking for.
0 comments:
Post a Comment