In commercial projects such as masonry, granite had already part of it for more than a century. Though marble is the most used ever since the beginning of greek civilization, granite tampa florida is a bit useful also due to its color and sparkling aspects in which marble does not have. Considering also that the marble is already out numbering.
Though it is one of the most used, you still have to know some problems that you will surely encounter whenever you decide to have it on your project. Well this is for you to decide whether to continue or look for another type. But these problem though do not occur at the same time but only depends on how you take good care of it.
The very first one is that this type of rock blisters, if being exposed to the water for a very long time, it will swell. This is a natural phenomenon of such stone which can be minimized using some lamination chemicals available in hardware stores. So if you think that exposure to water is part of the work, then this is not the ideal stone.
Another thing is that in the middle of the work, it could have the tendency to chip and crack which may cause delay, postponement or worse cancellation of the project. Its sensitivity to machinery is very high so if you still desire to have it due to some factors, the only thing you could do is to be very careful.
It is also very prone to efflorescence, it is the appearance of whitish substances on its surface due to salt build up. This phenomenon is very common in comfort room sinks and tiles and kitchen islands or tables due to over usage of cleaning agents or using the wrong cleaning agents which can create the reaction.
Its surface also erodes if left unprotected. There are available lamination chemicals that could cover the first layer of the granite. But for some reasons which you should not use such, it is not good if the material will be exposed in air for too long because its destiny will be like what happened to the sphinx of Egypt and other igneous composition.
If you are in a place which winter always occurs, this one might not be ideal in an outdoor setting. The process of thawing and freezing can cause flaking to the stone. This one can be bad for layers are stripping from time to time and so if you will be making a sculpture of it, it will reach to the point that the details will become dull.
Another problem is vandalism and bird waste stains. Yes, even if they are not caused by the stone, its reaction is a big problem because once the act is already done it can no longer be undone not unless you will sacrifice the surface affected.If the stain is already on it, it can no longer be removed without damaging it unlike glasses which you can still find a way. Those iron connectors can also cause for its staining. So whenever you will use something, be sure that it will not cause it to damage its real appearance.
Though it is one of the most used, you still have to know some problems that you will surely encounter whenever you decide to have it on your project. Well this is for you to decide whether to continue or look for another type. But these problem though do not occur at the same time but only depends on how you take good care of it.
The very first one is that this type of rock blisters, if being exposed to the water for a very long time, it will swell. This is a natural phenomenon of such stone which can be minimized using some lamination chemicals available in hardware stores. So if you think that exposure to water is part of the work, then this is not the ideal stone.
Another thing is that in the middle of the work, it could have the tendency to chip and crack which may cause delay, postponement or worse cancellation of the project. Its sensitivity to machinery is very high so if you still desire to have it due to some factors, the only thing you could do is to be very careful.
It is also very prone to efflorescence, it is the appearance of whitish substances on its surface due to salt build up. This phenomenon is very common in comfort room sinks and tiles and kitchen islands or tables due to over usage of cleaning agents or using the wrong cleaning agents which can create the reaction.
Its surface also erodes if left unprotected. There are available lamination chemicals that could cover the first layer of the granite. But for some reasons which you should not use such, it is not good if the material will be exposed in air for too long because its destiny will be like what happened to the sphinx of Egypt and other igneous composition.
If you are in a place which winter always occurs, this one might not be ideal in an outdoor setting. The process of thawing and freezing can cause flaking to the stone. This one can be bad for layers are stripping from time to time and so if you will be making a sculpture of it, it will reach to the point that the details will become dull.
Another problem is vandalism and bird waste stains. Yes, even if they are not caused by the stone, its reaction is a big problem because once the act is already done it can no longer be undone not unless you will sacrifice the surface affected.If the stain is already on it, it can no longer be removed without damaging it unlike glasses which you can still find a way. Those iron connectors can also cause for its staining. So whenever you will use something, be sure that it will not cause it to damage its real appearance.
About the Author:
You can visit granitebyalpha.com for more helpful information about Some Issues Of Using Granite.
No comments:
Post a Comment